Powered by GitBook

telnet://192.168.42.253

User Access Verification
Password: 
Switch> enable

Switch# configure terminal
Switch# config t

Switch# show boot
BOOT path-list:       
Config file:          flash:/config.text
Private Config file:  flash:/private-config.text
Enable Break:         no
Manual Boot:          no
HELPER path-list:     
NVRAM/Config file
      buffer size:    32768


Switch# show version
Cisco Internetwork Operating System Software 
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 04-Mar-03 02:14 by yenanh
Image text-base: 0x80010000, data-base: 0x805A8000

ROM: Bootstrap program is CALHOUN boot loader

C2950 uptime is 1 week, 2 days, 5 hours, 52 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-13.EA1.bin"

cisco WS-C2950SX-24 (RC32300) processor (revision F0) with 20839K bytes of memory.
Processor board ID FHK0743Z1BJ
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0E:38:5E:F3:C0
Motherboard assembly number: 73-8135-06
Power supply part number: 34-0965-01
Motherboard serial number: FOC07430MRG
Power supply serial number: DAB0740DLFY
Model revision number: F0
Motherboard revision number: A0
Model number: WS-C2950SX-24
System serial number: FHK0743Z1BJ
Configuration register is 0xF

Switch> enable
Switch# config t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)# ntp server time1.google.com
Switch(config)# ntp server time2.google.com
Switch(config)# ntp server time3.google.com
Switch(config)# ntp server time4.google.com
Switch(config)# end

Switch# show interfaces gigabitethernet0/2

Switch(config-if)# authentication order mab webauth

Switch# ?
Exec commands:
  <1-99>           Session number to resume
  access-enable    Create a temporary Access-List entry
  access-template  Create a temporary Access-List entry
  archive          manage archive files
  cd               Change current directory
  clear            Reset functions
  clock            Manage the system clock
  cns              CNS subsystem
  configure        Enter configuration mode
  connect          Open a terminal connection
  copy             Copy from one file to another
  debug            Debugging functions (see also 'undebug')
  delete           Delete a file
  dir              List files on a filesystem
  disable          Turn off privileged commands
  disconnect       Disconnect an existing network connection
  dot1x            IEEE 802.1X commands
  enable           Turn on privileged commands
  erase            Erase a filesystem
  exit             Exit from the EXEC
  format           Format a filesystem
  fsck             Fsck a filesystem
  help             Description of the interactive help system
  lock             Lock the terminal
  login            Log in as a particular user
  logout           Exit from the EXEC
  mkdir            Create new directory
  more             Display the contents of a file
  name-connection  Name an existing network connection
  no               Disable debugging functions
  ping             Send echo messages
  pwd              Display current working directory
  rcommand         Run command on remote switch
  reload           Halt and perform a cold restart
  rename           Rename a file
  resume           Resume an active network connection
  rmdir            Remove existing directory
  rsh              Execute a remote command
  send             Send a message to other tty lines
  setup            Run the SETUP command facility
  show             Show running system information
  systat           Display information about terminal lines
  telnet           Open a telnet connection
  terminal         Set terminal line parameters
  test             Test subsystems, memory, and interfaces
  traceroute       Trace route to destination
  tunnel           Open a tunnel connection
  udld             UDLD protocol commands
  undebug          Disable debugging functions (see also 'debug')
  verify           Verify a file
  vlan             Configure VLAN parameters
  vmps             VMPS actions
  vtp              Configure global VTP state
  where            List active connections
  write            Write running configuration to memory, network, or terminal

results matching ""

No results matching ""